Before you can begin exploring with your new PowerRay, it's necessary to register with the Vision+ app and activate the vehicle. The steps below will guide you through registration and activation, so you can start diving as soon as possible. First, follow the below steps to register:
- Download the Vision+ app.
- Make sure that you are connected to a WiFi network.
- Launch the Vision+ app and select the button at the lower right corner of the screen labeled "REGISTER".
- Provide an email address and press "GET CODE".
- A verification code will be sent to the email address you provided. If you do not receive this email, try checking your spam folder. It may take some time to receive this email.
- Once you have received the code, you can log into the Vision+ app. You can change your password and make other adjustments to your account in Settings.
Congratulations, you are officially registered! Next, let's activate your PowerRay:
- Close the Vision+ app and launch it again. You should receive a notification reading "Activate Immediately."
- Press "Activate" and, when prompted, press "Confirm."
- Without closing the app, switch to your WiFi settings. Connect to your home WiFi network.
- Return to the Vision+ app. When prompted, press "Confirm." The PowerRay will then be activated automatically.
- Return to your WiFi settings and connect to the network "PRA_station_xxxxxx."
- When your mobile device has successfully connected to the PowerRay base station's WiFi network, you will receive a notification reading, "Device is Connected."
- Press "Start Diving" and enjoy the underwater exploration!